Cisco Ccna 200-301 Practical Lab Guide With Packet Tracer Pdf 【90% TOP】

ip nat inside source static 192.168.1.10 200.1.1.10 interface g0/0 (inside) ip nat inside interface s0/1/0 (outside) ip nat outside :

ip dhcp pool LAN_POOL network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 (Packet Tracer only):

network 10.1.1.0 0.0.0.3 area 0 network 192.168.2.0 0.0.0.255 area 1 : show ip ospf neighbor | show ip route ospf Lab 7 – IPv6 Addressing & Routing Configure IPv6 on interface : ip nat inside source static 192

access-list 100 deny tcp any any eq telnet access-list 100 permit ip any any interface g0/1 ip access-group 100 in Static NAT :

vlan 10 name Sales vlan 20 name Engineering interface f0/1 switchport mode access switchport access vlan 10 interface f0/24 switchport mode trunk switchport trunk allowed vlan 10,20 : show vlan brief | show interfaces trunk Lab 3 – STP & EtherChannel Topology : SW1 – SW2 – SW3 (triangle with redundant links) ip nat inside source static 192

ipv6 unicast-routing interface g0/0 ipv6 address 2001:db8:1:1::1/64 ipv6 enable :

ipv6 router ospf 1 router-id 1.1.1.1 interface g0/0 ipv6 ospf 1 area 0 Standard ACL (block one host) : ip nat inside source static 192

: