Easycwmp Tutorial Access

config acs 'general' option acs_url 'https://your-acs-server.com:7547/' option periodic_interval '3600' # seconds option periodic_enable '1' option retry_interval '30' # seconds option connection_request_username 'admin' option connection_request_password 'secret' option ssl_verify_host '0' # disable for self-signed certs option ssl_verify_path '0' config device 'device' option manufacturer 'MyCompany' option manufacturer_oui '001234' option product_class 'MyRouterV1' option serial_number 'SN1234567890' option hardware_version '1.0' option software_version '1.0.0'

# Force an Inform immediately easycwmp inform easycwmp download Reboot the device (if allowed by ACS) easycwmp reboot Factory reset easycwmp factoryreset Show current parameters easycwmp get parameter name Device.DeviceInfo.SerialNumber 6. Testing with GenieACS (Local ACS) To fully test EasyCWMp, you need an ACS. Let’s set up GenieACS quickly. Step 1: Install GenieACS # Using Docker (easiest) docker run -d --name genieacs -p 7547:7547 -p 3000:3000 genieacs/genieacs Step 2: Access GenieACS UI Open http://localhost:3000 – default credentials: admin / admin Step 3: Configure EasyCWMp to Use GenieACS Edit /etc/config/easycwmp :

| Requirement | Details | |-------------|---------| | | Linux (Debian/Ubuntu, OpenWrt, Yocto, Buildroot) | | Libraries | libcurl (with SSL support), libjson-c, libmicrohttpd, libubox (optional), libuci (optional) | | Network | Internet access for ACS communication | | Permissions | Root or sudo access to install packages and modify system files |

Package the new .ipk or .deb as a firmware upgrade, or use the Download RPC with FileType = 3 Vendor Configuration File and run a script. easycwmp tutorial

Not natively – only HTTP/S.

config local 'local' option interface 'eth0' # network interface option port '7548' # for connection requests uuidgen > /etc/easycwmp/serial Configure ACS Connection Request Handling EasyCWMp must listen for incoming requests from the ACS. This is typically done via iptables or by binding to a specific port.

easycwmpd is the persistent daemon that handles connection requests and periodic informs. The easycwmp script is a CLI tool that sends RPCs via the daemon. config acs 'general' option acs_url 'https://your-acs-server

# In /etc/config/easycwmp config connection_request option interface 'eth0' option port '7548' option path '/' Start the Backend Daemon (easycwmpd) sudo easycwmpd -f -d # foreground + debug mode Or run as a service:

# Build OpenWrt with easycwmp package make menuconfig # select easycwmp make flash router

option acs_url 'https://primary.acs.com' option backup_acs_url 'https://backup.acs.com' Create a script for vendor-specific RPC methods in /usr/lib/easycwmp/rpc/ : Step 1: Install GenieACS # Using Docker (easiest)

Deploy 1000 home routers with EasyCWMp, managed by GenieACS.

sudo systemctl start easycwmpd sudo systemctl enable easycwmpd ps aux | grep easycwmpd netstat -tulpn | grep 7548 # connection request port Using the Command-line Tool The easycwmp script interacts with the daemon via Unix socket or sends direct HTTP requests to the ACS.