Therefore:
Wait, check: If A moves down 1 m, rope segment from fixed pulley to A shortens by 1 m. That rope length change must come from two places: (1) horizontal movement of B, (2) change in diagonal length from left fixed point to B. That diagonal length change rate = ( v_B \cos\theta ) (because only horizontal motion of B changes the diagonal length at rate ( v_B \cos\theta )). Therefore: Wait, check: If A moves down 1
[ v_B = \frac{v_A}{\cos\theta} ]
This example focuses on a common but subtle topic: and relative velocity , which often trips students up. Sample Problem (Inspired by Bedford & Fowler, Ch. 2-3) Problem: Block A is pulled down the inclined plane at a constant speed ( v_A = 2 \text{ m/s} ). The rope system shown (a single continuous rope, fixed at the top left, passing through a movable pulley attached to block B, and then down to block A) causes block B to move horizontally. Determine the velocity of block B when the rope segment between the fixed pulley and block B makes an angle ( \theta = 30^\circ ) with the horizontal. The rope is always taut and inextensible. [ v_B = \frac{v_A}{\cos\theta} ] This example focuses