Fr24feed.ini -

Your fr24key is sensitive. Avoid posting it in public logs or forums. If accidentally exposed, revoke it via your Flightradar24 account and generate a new one.

# FR24 Feed configuration file fr24key = "your-unique-sharing-key-here" receiver = "dvbt" # Options: dvbt, avr, beast, sbs3, rtlsdr, etc. host = "127.0.0.1:30005" # If using Beast or RAW format from dump1090 bs = "no" # Enable Beast raw output (yes/no) raw = "no" # Enable raw output for other aggregators log-mode = "1" # 0 = quiet, 1 = normal, 2 = verbose log-path = "/var/log/fr24feed" # Where logs are stored mlat = "yes" # Enable/disable MLAT (multilateration) mlat-without-gps = "no" # Allow MLAT without GPS fix fr24feed.ini

If you're running an ADS-B receiver feeding data to Flightradar24, the fr24feed.ini file is the heart of your configuration. This plain-text file controls how the fr24feed software interacts with your hardware, the Flightradar24 servers, and your local network. Your fr24key is sensitive

fr24feed.ini may be small, but it's mighty. Understanding its parameters allows you to fine-tune your ADS-B feeder, troubleshoot issues, and contribute better quality data to Flightradar24. Whether you're a beginner with a Raspberry Pi or running a professional setup, mastering this file is a key step. fr24feed

Below is a typical fr24feed.ini example with explanations: