Python Scripts For Abaqus Learn By Example Pdf -

# Run job jobName = f'Job_E_int(E)' myJob = mdb.Job(name=jobName, model=modelName) myJob.submit() myJob.waitForCompletion()

# Assign mesh size part = mdb.models[modelName].parts['Beam'] part.seedPart(size=size, deviationFactor=0.1) part.generateMesh()

# Extract von Mises stress at fixed coordinates odb = openOdb(jobName + '.odb') frame = odb.steps['ApplyLoad'].frames[-1] stress = frame.fieldOutputs['S'] # Find stress at (length, 0) – tip tip_value = None for val in stress.values: if abs(val.nodeLabel - some_node_label) < 1e-3: # simplified tip_value = val.mises break results.append((size, tip_value)) odb.close() print("Mesh convergence data:", results)

for E in modulus_values: modelName = f'Model_E_int(E)' mdb.Model(name=modelName) # ... (beam creation similar to Example 1, but with E variable) # Omitted for brevity – reuse Example 1 with dynamic model naming python scripts for abaqus learn by example pdf

Node label detection requires careful handling – in practice, use getClosest() on a set. 6. Example 4: Batch Post-Processing Multiple ODB Files Goal: Extract reaction force from many simulation results in a folder.

print("Batch post-processing done.") Goal: Build a simple dialog to input beam length and force.

# beam_plugin.py from abaqusConstants import * from abaqusGui import * import os class BeamPlugin(AFXDataDialog): def (self, form): AFXDataDialog. init (self, form, 'Parametric Beam', BUTTON_OK | BUTTON_CANCEL) AFXTextField(self, 8, 'Length (mm)', form.lengthKw) AFXTextField(self, 8, 'Force (N)', form.forceKw) # Run job jobName = f'Job_E_int(E)' myJob = mdb

for filename in os.listdir(odb_folder): if filename.endswith('.odb'): odb_path = os.path.join(odb_folder, filename) odb = openOdb(path=odb_path)

# Clean up del mdb.models[modelName] output_file.close() print("Parameter sweep complete. Check sweep_results.txt")

class BeamForm(AFXForm): def (self, owner): AFXForm. init (self, owner) self.lengthKw = AFXFloatKeyword(self, 'length', True, 100.0) self.forceKw = AFXFloatKeyword(self, 'force', True, 1000.0) Example 4: Batch Post-Processing Multiple ODB Files Goal:

# cantilever_beam.py from abaqus import * from abaqusConstants import * from caeModules import * length = 100.0 height = 10.0 force = 1000.0 youngs_mod = 2.1e5 poissons_ratio = 0.3 Create model modelName = 'CantileverBeam' myModel = mdb.Model(name=modelName) if 'Model-1' in mdb.models.keys(): del mdb.models['Model-1'] Create sketch s = myModel.ConstrainedSketch(name='BeamProfile', sheetSize=200.0) s.rectangle(point1=(0.0, -height/2), point2=(length, height/2)) Create part myPart = myModel.Part(name='Beam', dimensionality=TWO_D_PLANAR, type=DEFORMABLE_BODY) myPart.BaseShell(sketch=s) Create material material = myModel.Material(name='Steel') material.Elastic(table=((youngs_mod, poissons_ratio),)) Assign section (homogeneous solid) myPart.HomogeneousSolidSection(name='BeamSection', material='Steel', thickness=1.0) region = myPart.Set(cells=myPart.cells, name='BeamSet') myPart.SectionAssignment(region=region, sectionName='BeamSection') Mesh myPart.seedPart(size=5.0) myPart.generateMesh() Create assembly myAssembly = myModel.rootAssembly myAssembly.Instance(name='BeamInstance', part=myPart, dependent=ON) Step myModel.StaticStep(name='ApplyLoad', previous='Initial', initialInc=0.1, maxInc=0.1, minInc=1e-8) Boundary condition (fixed left edge) leftEdge = myAssembly.instances['BeamInstance'].edges.findAt(((0.0, 0.0),)) myModel.DisplacementBC(name='Fixed', createStepName='Initial', region=myAssembly.Set(edges=leftEdge, name='FixedSet'), u1=0.0, u2=0.0, ur3=0.0) Load (point force at right tip) rightVertex = myAssembly.instances['BeamInstance'].vertices.findAt(((length, 0.0),)) myModel.ConcentratedForce(name='TipForce', createStepName='ApplyLoad', region=myAssembly.Set(vertices=rightVertex, name='LoadSet'), cf2=-force) Create job and submit jobName = 'BeamAnalysis' myJob = mdb.Job(name=jobName, model=modelName) myJob.submit() myJob.waitForCompletion() print("Analysis completed!")

# Extract max displacement from .odb odb = openOdb(path=jobName + '.odb') lastFrame = odb.steps['ApplyLoad'].frames[-1] displacement = lastFrame.fieldOutputs['U'] max_disp = max([value.dataDouble for value in displacement.values]) output_file.write(f'E, max_disp\n') odb.close()

# Submit job jobName = f'Job_Mesh_size' job = mdb.Job(name=jobName, model=modelName) job.submit() job.waitForCompletion()

# batch_postprocess.py import os from odbAccess import * odb_folder = './simulation_results/' output_lines = []