If you picked up a dusty, heavy metal box at a garage sale or inherited one from a ham radio operator’s estate, chances are you’re holding the Realistic MPA-150 (often catalog # 12-150 ). This little workhorse was Radio Shack’s answer to affordable 150-watt PA amplification in the 1980s and 90s.
For connecting a Bluetooth receiver or MP3 player, use the TAPE INPUT . It is high-level (-10dBV). The AUX input works too, but TAPE is usually more forgiving. Radio Shack 12 150 Manual
Do not go below 4Ω. The manual states clearly: "Total impedance must not be less than 4 ohms." If you connect two 4Ω speakers in parallel (2Ω), the amp will overheat and die in 10 minutes. If you picked up a dusty, heavy metal
But without the manual, that mess of jacks on the back (6-pin mic inputs? screw terminals?) might as well be alien hieroglyphics. It is high-level (-10dBV)