> NEUROSUITE SOFTWARE.

NEUROSUITE is a collection of software that will help you work with multi-generation ECUs such as EDC15, ME7.X, EDC16, MED9, MEDC17, MDG1, SIMOS3 to 18, PCR2.1, SDI6 to 21, PPD1.X

How it works ?

Our software works with a pay-as-you-go token system. The usage cost per file is available in the BUY TOKEN section. The same token key works with the entire software suite. This way you don't have a dongle so you can use them on all your PCs at the same time.

The softwares requires an active internet connection and Microsoft Windows 7, 8, 10+ PC.

You are invited to visit each section of our site to learn more about the functionality of each software.

S7-200 Smart Password Unlock Apr 2026

: Wait for the PLC LEDs to stop flashing, then remove the card and restart. 3. Recovering or Cracking the Password S7 200 Smart PLC Reset to factory default

: Power cycle the PLC (turn it off and back on) to complete the reset. 2. Factory Reset via Micro SD Card s7-200 smart password unlock

If you cannot connect via software because the IP address or communication settings are also locked, you can use a memory card to force a reset. : Use a standard Micro SD card (formatted). : Create a text file on the card named S7_JOB.S7S : Inside the file, type only the text: Reset to factory defaults : Wait for the PLC LEDs to stop

: If prompted for a password to perform the clear, enter the master override: : Create a text file on the card named S7_JOB

To unlock or bypass a password on a Siemens S7-200 SMART PLC you typically have to choose between a Factory Reset (which deletes all existing program data) or using the Master Password to wipe the memory for a fresh download 1. The "Master Password" Method (Memory Clear)

: Turn off the PLC, insert the card, and turn the PLC back on.