Script Do Simulador De Lavagem De Pressao -

function OnTriggerHeld(delta_time, hit_point, hit_surface): if fuel_level <= 0.0: PlaySound("engine_sputter") ShowWarning("Out of Fuel!") return if is_overheated == true: return // Block spraying until cooldown

if IsSpraying(): current_temp += heat_generated else: current_temp -= cooling

UpdateUI() // Refresh HUD PlaySound("pump_idle_loop") This is the main loop triggered every frame while the player holds the trigger. Script do Simulador de Lavagem de Pressao

// Soap effect: reduces dirt resistance for a few seconds if active_nozzle == NozzleType.SOAP: hit_surface.temp_dirt_resistance *= 0.7

Document ID: PWS-SCRIPT-V1.0 Type: Technical Design Document (TDD) / Pseudocode Implementation 1. Abstract This document outlines the core script logic for a Pressure Washer Simulator . The script manages three primary systems: Machine Physics (pressure/temperature), Cleaning Mechanics (dirt degradation), and Progression (rewards/upgrades). The architecture follows an event-driven model to maintain separation between user input (mouse/keyboard/controller) and visual feedback (particle effects/mesh decals). 2. Core Variables Declaration // --- Machine State --- float current_psi = 0.0 // Current water pressure (0 to 1500) float current_temp = 20.0 // Water temperature in Celsius (Ambient to 100) float soap_level = 0.0 // 0 to 100% float fuel_level = 100.0 // 0 to 100% // --- Nozzle Settings --- enum NozzleType { RED(0), YELLOW(15), GREEN(25), WHITE(40), SOAP(50) } NozzleType active_nozzle = GREEN float spray_angle = 25.0 // Degrees (narrow vs wide) float impact_force = 1.0 // Multiplier for dirt removal The script manages three primary systems: Machine Physics

// 1. Consume resources fuel_level -= (0.5 * delta_time) // Fuel drain rate if active_nozzle == NozzleType.SOAP: soap_level -= (1.0 * delta_time) if soap_level <= 0: SwitchNozzle(NozzleType.GREEN) // Auto-switch to water

// 4. Visual & Audio feedback if dirt_removed > 0: SpawnDirtParticles(hit_point, dirt_removed) PlaySound("pressure_hiss", volume = cleaning_power / 100) UpdateComboSystem(dirt_removed) player_score += dirt_removed * 10 Core Variables Declaration // --- Machine State ---

return final_power Prevents infinite spraying and simulates engine wear.

function InitializeSimulator(): current_psi = 300.0 // Start with medium pressure current_temp = 20.0 // Cold water active_nozzle = NozzleType.GREEN fuel_level = 100.0 soap_level = 100.0 is_overheated = false combo_timer = 0.0 // Reset all dirt decals on surfaces for each surface in scene_surfaces: surface.dirt_amount = GetInitialDirtByLevel(current_level)