Download the latest ProSave from Siemens Support (Entry ID: 10347815). Practice on a spare panel by creating a .PSB backup, then restoring it. That single exercise will prepare you for 90% of real-world HMI recovery scenarios. Author’s Note: Always refer to the current Siemens manual for your specific HMI series, as panel boot modes and connection types evolve with new hardware generations.
Introduction In the world of industrial automation, the Human-Machine Interface (HMI) is the window into your process. When an HMI panel fails, becomes corrupted, or requires mass deployment, Siemens provides a powerful, often underutilized tool: SIMATIC ProSave . simatic prosave download
Mastering the OS download, application transfer, and .PSB restore procedures will drastically reduce downtime and turn a potential panel disaster into a 10-minute fix. Download the latest ProSave from Siemens Support (Entry
Connect your PC directly to the HMI’s Ethernet port (or USB if supported). Set a static IP on your PC in the same subnet as the panel (e.g., Panel: 192.168.0.1, PC: 192.168.0.10). Author’s Note: Always refer to the current Siemens
Open ProSave on your PC. From the “Device” menu, select your exact panel type (e.g., SIMATIC HMI TP700 Comfort ). Go to “General” → “Connection” and select the correct channel (Ethernet, USB, Serial). Enter the panel’s IP address.
| Pillar | Requirement | |--------|--------------| | | PC with Ethernet, USB, or Serial port (depends on panel model). Siemens PG cables (e.g., USB/PPI Multi-Master) for legacy panels. | | Software | ProSave version matching or exceeding your panel’s firmware version. Available on Siemens Service Portal or via WinCC flexible/TIA Portal installation. | | Panel Mode | Panel must be in Transfer (Service) Mode . For OS downloads, it often needs to be in Safe Mode or Maintenance Mode . | Step-by-Step: Performing an OS Download (Panel Recovery) This is the most common high-stakes procedure.