Xilinx Ddr4 Ip «CONFIRMED»

Abstract —Modern FPGA-based accelerators require high-bandwidth, low-latency external memory. The Xilinx DDR4 SDRAM Controller IP (MIG) provides a configurable interface to DDR4 memories, but achieving peak theoretical bandwidth requires careful parameter tuning, proper clock domain crossing, and efficient user-logic arbitration. This paper presents a comprehensive analysis of the IP architecture, key configuration trade-offs, and a validated methodology to achieve >90% bus efficiency under real traffic patterns. A case study using a 4K video frame buffer demonstrates 94.2% write efficiency and 91.7% read efficiency at 2666 Mbps.

—DDR4, FPGA, Xilinx, MIG, memory controller, high-bandwidth, UltraScale+ I. Introduction High-performance FPGA designs—ranging from machine learning accelerators to software-defined radios—rely on external DRAM. DDR4 SDRAM offers a favorable balance of speed, density, and power. Xilinx provides the Memory Interface Generator (MIG) IP to bridge user logic to DDR4 physical interfaces. However, simply instantiating the IP with default settings often yields sub-50% bus efficiency due to row conflicts, command bubbles, and improper burst alignment. xilinx ddr4 ip

Future work will explore the new DDR5 MIG IP and the impact of Pseudo-Channel mode on latency. [1] Xilinx, PG150 – DDR4 SDRAM Controller v2.2 Product Guide , 2021. [2] JEDEC Standard JESD79-4D, DDR4 SDRAM Specification , 2021. [3] M. Langhammer, "Memory Bandwidth in FPGAs," Xilinx White Paper WP490 , 2019. [4] S. K. Moore, "Achieving 95% DRAM Efficiency in FPGA Accelerators," ACM TRETS , vol. 14, no. 3, 2022. Appendix : Sample Verilog snippet for efficient native interface write engine (available upon request). A case study using a 4K video frame buffer demonstrates 94